台灣奶粉養大了我

gwagwa

各位大大喝對了
喝錯奶粉後果不堪設想

totoro

今天原廠根據飛友反應的問題出了一個升級包，免費提供給已經購買的使用者
問題還真不少！也說明大家所反應的問題並非空穴來風。雖然原廠的服務態度是不錯，只是這麼多問題賣出來前為甚麼沒作比較嚴格的測試？
之前有人會說亞拓把使用者當白老鼠，現在這個才是大白老鼠！這就是我說的現在還不宜考慮這機子的原因
還有一點很有趣，亞拓出新機有瑕疵，很多人（包含外國人）會說出廠前測試不負責任，但外國機出問題然後來個update pack，大家會鼓掌叫好說"真是負責"
唉...這真是個令人混淆的時代！

I want to comment on the update pack. First of all we did it because we wanted to address the problems that most end user reported after the launch.
Giving it away FREE is our way of saying thank you to all the people that believed in our new company and in our heli.

Now some comments on the parts.

New main shaft (steel hollow): this mod was necessary to address the tracking problem, aluminum main shaft was not able to keep up with high head speeds and today's hardcore 3D pilots. Steel main shaft COMPLETELY addresses the tracking problem once and for all.

New main blade grips: we rearranged the bearing placement in order to have wider support to the grip and eliminate 99% of the play there was before. Putting the thrust bearing inside also enhances the life of the thrust by a good amount.

New washout arms: we just made the hole where the pin engages much tighter. Now there are no chances of it falling out in flight

New tail pitch boss: We opened up a little bit (0,1mm) the channel in wich the screws ride in order to have a much smoother movement of the assembly

New T/R box: We strengthened the area around holes in wich fin screws go. That area was getting hairline cracks easily and, in some cases, brought to T/R in flight failure

New Fins: Do i have to comment on this???? Old ones are just plain wrong!!!!! (our mistake)


Hope to have done good to all Protos owners.

Thank you for your attention,

regards,

Corrado Steri

www.msheli.com

Corrado

[ 本帖最後由 totoro 於 2008-9-25 16:47 編輯 ]

Bugatti

原帖由 totoro 於 2008-9-25 16:38 發表
今天原廠根據飛友反應的問題出了一個升級包，免費提供給已經購買的使用者

應該是差別在免費與自費吧