大暴龍軸傳動安裝方式

東仔

原帖由 rappyfly2 於 2007-1-8 09:10 發表
Hi

Does anyone know the main to tail ratio on the shaft drive? The gear box does not have the key, does it will have ket later on?

D

這位大大我用雅虎翻譯起來怪怪的，看不懂!
有人可以幫忙ㄇ?
早知道上英文課時多用功一點!

vet

東仔，偶的英文也是一級的爛的啦!
我判斷，由您所po的圖而言，少了tail rotor output gear的圖片，他應該是在問這兒和main gear 和這個tail rotor output gear之間的ratio(之前他就問過了，不過沒人回他，啊pico有問他ratio是指匯率嗎?不過那位大大也一直沒有回pico這問題的)，他說重點不在tail gearbox處的啦，啊您都一直只po 這裏的圖的了!我亂猜的啦!

vet

他也問，不知可不可以將來也po上這個 rotor output gear的圖片嗎?

東仔

原帖由 vet 於 2007-1-8 12:08 發表
他也問，不知可不可以將來也po上這個 rotor output gear的圖片嗎?

rotor output gear翻譯中文是?
電動子產品齒輪

vet

原帖由 rappyfly2 於 2007-1-8 09:10 發表
Hi

Does anyone know the main to tail ratio on the shaft drive? The gear box does not have the key, does it will have ket later on?

D

Hi !rappyfly2，
Excuse all，your question about ratio between main gear and tail rotor output gear is   commercial secret!pardon all!

vet

原帖由 東仔 於 2007-1-8 13:18 發表

rotor output gear翻譯中文是?
電動子產品齒輪

tail  rotor output gear 在軸桿前端處的那個齒，他問的是指此處和連接此齒之齒等的齒比率，不過，我剛以又回頭看了一下此整個po文，公仔怕有rc蟑螂所以視為商場上的機密了哦!

pico

原帖由 thetrex600forum 於 2007-1-8 04:56 發表
That's a very good picture tutorial.
那是一個非常好的貼圖範例
Brilliant
太厲害了
Now if you could post it in English on thetrex600forum....that would be great! hehehe
現在 如果你可以用英文把它貼在thetrex600forum .... 那將會是多偉大的事情啊! 嘿嘿

Hi symon! you can take it yourself, because we don't have the right to share to your site.
That's a friend found it in the internet.
I think you can find it either.

[ 本帖最後由 pico 於 2007-1-8 13:45 編輯 ]

pico

原帖由 rappyfly2 於 2007-1-8 09:10 發表
Hi

Does anyone know the main to tail ratio on the shaft drive? The gear box does not have the key, does it will have ket later on?

D

老大
基本上 換上了以後
尾旋翼也沒有做修改
可以視為跟皮帶傳動的最終齒比一樣的即可
只是軸傳動損耗及傳動效率表現會更好
提供您參考

pico

原帖由 vet 於 2007-1-8 11:49 發表
東仔，偶的英文也是一級的爛的啦!
我判斷，由您所po的圖而言，少了tail rotor output gear的圖片，他應該是在問這兒和main gear 和這個tail rotor output gear之間的ratio(之前他就問過了，不過沒人回他，啊pico ...

這個飛友飛得不錯 他也有在飛大暴龍
之前有來過台北
可惜沒機緣見上一面
問他匯率其實是有點兒開玩笑的啦
當然 也因為他問的時候 加了一個 now
這樣問 當然很正常

說實在的 問這齒比的事情
由我們來回答 也答不出個所以然 瞭解的人就幫個忙吧

vet

呵呵!偶只是想來多賺一些積分的啦!偶也是用翻譯器的啦!今拍寫的啦!我的英文很爛的啦!
I Dose(does，do) get you

[ 本帖最後由 vet 於 2007-1-8 13:57 編輯 ]

rappyfly2

The shaft drive is more effieiency, we might gain a better tail performance by using a bit higher ratio, like 4.8 to 1. It will be no secret when the shaft kit released to the market. The stock ratio is on the low side, I was hoping for 4.7 or 4.8 to 1. Howeve, the new tail assembly has  bigger disk which might have the same effect as high ratio.

Thanks for the reply

D

andy268

Torgue Tube Gear Ratio was same as Belt drive(1:4.5). the reason we keep it same bacause EP heli. head speed usually higher than nitro heli.(1 to 4.7-4.8). idea tail speed around 8500-9500rpm. for T-rex600 tail gear ratio keep in 1:4.5 it will turn out 9000rpm on tail if your head speed around 2000rpm.


Andy

Symon

Hi symon! you can take it yourself, because we don't have the right to share to your site.

Thanks guys
感謝人

Your work is fully appreciated
您的工作充分地被讚賞

I wouldn't be able to use your photographs though would I?
我不能使用您的相片雖則?

Really detailed stuff
真正地詳細的材料

[ 本帖最後由 thetrex600forum 於 2007-1-9 05:02 編輯 ]

東仔

原帖由 thetrex600forum 於 2007-1-9 04:54 發表


Thanks guys
感謝人

Your work is fully appreciated
您的工作充分地被讚賞

I wouldn't be able to use your photographs though would I?
我不能使用您的相片雖則?

Really detail ...

製作英文版中~
In the manufacture English version ~

請稍待~
please wait a bit ~

pico

東仔 利害啦
加油喔