600N國外飛友使用配備參考~歡迎飛友一起提供分享

gogo123

歡迎玩600N飛友一起提供將你的動力電裝貼出來分享

我的

600N Por
600A
OS 50
Align pipe排器管
HS6965 X3
GY611
2合1

[ 本帖最後由 gogo123 於 2007-9-28 13:31 編輯 ]

gogo123

171#

600N Sport
OS 50 Hyper/Hatori SB50
V2 V-Blades
9451's on cyclic
GY611/9256 on tail
ATG(with Hotwings optical sensor)/9253 on throttle
TP 910 mAh 3S with 5.4V UBEC
DX7/AR7000

gogo123

169 170

Just picked up 2 Sport's at IRCHA. Doing the builds as we speak.

Hypers w/MP5's or Align Pipes (have both to test here with me)
Radix all round w Stubz and 440mm Flybars
LogicTech 6100's
3Dx Metal Fans
MultiGov's
9351's (swash)
9451's (throttle)
Metal Grips w/Infinavation Dampers and Shims
Align 2 in 1 regs with Relion 2600 Lithiums

Jason Greenwood

Fury Extreme, R90SE, R50 | Kasama, 2X T600N's

gogo123

number 165
nitro pro
os hyper
align metal fan
new align pipe
9255 cyclic
gy 401 and 9254
rev lock 10
radix mains
so much nicer to fly then my raptor 50 r.i.p

gogo123

163#



jr 8715
os hyper
mp5 50
gy611 +9256
cms revlock 20
radix 600 mains stock tail



finaly, i made it to SENIOR HELIMEN

gogo123

Am I #152 or #153 since TREX600Ndriver didnt' follow the numbers and
eric268 didn't pick up on it?


600N Sport
Torque tube
Metal blingy bits ( taken off my 600E that I sold)
OS50
MP? (ain't decided yet)
9252's
601
Multigov (big break here from my normal GV1!)
Arizona reg and fromeco batts.

This hobby is like Kryptonite to chicks!

gogo123

#150 and 151
#1
600N SPORT
OS 50 Hyper
CY MP2
ALIGN 2in1 reg
Hitec 5955TG
Logictech 6100G

#2
600N PRO
YS 50ST
CY MP2
ALIGN 2in1 reg
HITEC 5955TG
Futaba GY502

Both flying on JR9303

when inverted... down is up and up is expensive

gogo123

#148
OS 50
JK Hatori
3X9451
1X9254
611 9256
RevMax
Fromeco
Spektrum

[PHOTO]/fastphoto/47892/P8120227-8176.jpg[/PHOTO

Raptor 90,Trex 600N Pro,T-Rex 450SE, DX7

gogo123

#144

Yellow canopy from Align
Hitec servos
401 gyro
OS 50 Hyper
Align muffler
CY blades on main and tail
Sport Nitro



Oh what a feeling flying 3D can be

gogo123

I guess I'm No.143

Almost finished, can't wait to fly it. Just Wiring and programming left.

Trex600N Pro: White Canopy
V-Blade V2 600mm Main Blades
V-Paddle 80mm
V-Tails 95mm
Fromeco 6V dual Voltage Regulator with Pin Flag.
Futaba 9351 Cyclic
Futaba 9252 Throttle
Futaba GY611 Gyro w/9256 tail servo
Futaba 14MZ Tx
Futaba G3Rx
Futaba GV-1 Governor
G-Force Fan (latest version)
2mm Carbon Frame set
Align Metal Main Rotor grips
Duraflite 4000mah pack (plan on buying a lighter pack after CG check)
OS Hyper50
CY50 MP5 pipe
V50 Clutch liner
Maverick Header tank
I would like to have a custom Canopy painted eventually, but suppose that can wait.



Mellisa aka Lady Magic

gogo123

#136

SPORT
-DS821 on ciclic and throttle
-GY401 and 9253
-OS hyper
-Gforce HP fan
-Hatory SAB-5 RS
-Throttle jokey governor
-JR 7202 TX
-JR 790 RX
-NHP 600 blades

Girls and RC Helicopters are dangerous...!!! but we need them...!!!

gogo123

#135

Hitec 6965s on Cyclic
JR DS821 on throttle
GY-401 and 9254 on the tail for now until I reinstall my logictech
Arizona reg. and re-lions li-ion 2600mah
600mm radix
95mm curtis T/R blades
Curtis Stubz paddles
OS-50 hyper and Muscle pipe
Align CNC main grips
CNC fan
Powermaster 30%
all controlled by a JR 9303 and 2100 receiver
flies like its on rails

gogo123

In at 129..........

gogo123

Number 125
OS 50 Hyper
Funtech Muffler
401 and 9254
3001 on ccpm
2 in 1 reg and battery

gogo123

#124

600N Sport
OS 50 SX-H Hyper
Hatori SB-50HP Jason Krause Special (2-piece)
G-Force HE CNC Cooling Fan
Align 600B Carbon Main Blades (with canopy fx BladeFX decals)
CYE Super Stubz Paddles
Align 440mm Flybar
Align CNC Metal Tail Rotor Housing
Align Carbon Tail Blades

JR 9303 transmitter with Spektrum DM-9 module
AR7000 Spektrum Receiver
(3) JR DS8311 servos (cyclic)
(1) JR DS821 servo (throttle)
Futaba GY401 with S9254
Model Avionics RevMax
Align 2-N-1 Voltage Regulator



David E. Smith
President, ETMHS
AMA 579111
IRCHA 2336