what is different between high governor and low governor mode?
作者: wells
時間: 2005-8-30 15:48
I just found the information on RCGroups:
Low Governor Mode:
16000 RPM/pole (1ms)
100082 RPM/pole (2 ms)
High Govenor Mode:
106493 RPM/pole (1 ms)
337508 RPM/pole (2 ms)
I show three examples. First, assume the gear ratio
is 150T/15T = 10
A. Low governor mode + 2 poles motor.
Max. motor speed is (2mS pulse) : 8000 rpm
Min. motor speed is (1mS pulse): 50041 rpm
Max. head speed: 800 rpm
Min. head speed: 5004 rpm
50% of throat is about 2500 rpm
B. Low governor mode + 12 poles motor.
Max. motor speed is (2mS pulse) : 1333 rpm
Min. motor speed is (1mS pulse): 8340 rpm
Max. head speed: 133 rpm
Min. head speed: 834 rpm (TOO LOW)
C. High governor mode + 12 poles motor.
Max. motor speed is (2mS pulse) : 8874 rpm
Min. motor speed is (1mS pulse): 28125 rpm
Max. head speed: 887 rpm
Min. head speed: 28125 rpm
90% of throat is about 2500 rpm
| 歡迎光臨 亞拓遙控世界討論區 (https://forum.align.com.tw/) |
Powered by Discuz! X2.5 |