亞拓遙控世界討論區

標題: 600N國外飛友使用配備參考~歡迎飛友一起提供分享 [打印本頁]

作者: gogo123 時間: 2007-9-28 12:58
標題: 600N國外飛友使用配備參考~歡迎飛友一起提供分享
歡迎玩600N飛友一起提供將你的動力電裝貼出來分享

我的

600N Por
600A
OS 50
Align pipe排器管
HS6965 X3
GY611
2合1

[ 本帖最後由 gogo123 於 2007-9-28 13:31 編輯 ]

作者: gogo123 時間: 2007-9-28 13:02
貼文轉自RunRyder飛友分享

make me 85#(第85位飛友)
600 non pro
6100t gyro
9451's
ys50
mp5
align fiberglass blades
g-force fan
multigov limiter with s9254
440mm flybar
cool 30%
+/-12 / +/- 8 (collective/cyclic)

R90 SE YS91
trex600n YS50
trex450 v2 medusa
trex600 xl

[ 本帖最後由 gogo123 於 2007-9-28 13:17 編輯 ]

作者: gogo123 時間: 2007-9-28 13:03
(#90.5) Im always get caught in the middle some how.
YS50 ST
CY MP5 pipe
Align Metal fan HN6060
Raptor Header tank
Align billet blade grips
V-Blades 600mm main blades
CY 95mm tail rotor blades
CY stubs 3mm CF paddles
440mm fly bar
Align 6amp BEC.
Thunder Power 2100mAh 7.4 volt Lipo
DX7 Transmitter and Receiver
Futaba BLS451 Cylic servos x 3
Futaba S3155 Mini throttle servo
JR G770 with G8900 on tail
Aerospire muti-gov
((((This set up ROCK'S))))

作者: gogo123 時間: 2007-9-28 13:05
93 & 94#

Trex600N (Red)
OS 50 Hyper
Muscle Pipe MP5
V Blades Mains & Tails
Futaba 9255's
CSM SL720 & Revlock 20 & Cyclock
Fromeco Regulator & Align Regulator
Spektrum DX7

2 Mega Machines!

Matt

Sponsered By: CSM, NHP, Revolution Models, Spektrum, Tornado Fuels

作者: gogo123 時間: 2007-9-28 13:06
101#

hyper
MP5
601,9251
9451's
rev max
AR7000
TT mains
SAB tail

If I don't crash, I'm not trying hard enough.

作者: gogo123 時間: 2007-9-28 13:09
#107

Align Trex 600N Sport
OS 50 Hyper
Curtis Youngblood MP5 pipe
OS Bubbless Clunk
RotorTech 600mm CF main blades
Stock tail rotor blades
JR 2300 NiMH 6.0 Volt flight pack
MPI 5.4 Volt regulator
DX7 Transmitter and AR7000 Receiver
Futaba S9252 Cylic servos x 3
Spektrum DS821 throttle servo
GY611 with S9256 servo

Just finishing it. Will fly this weekend.

LJS

Swift w TP5000, T-Rex 600N w OS 50, Spektrum DX7

作者: gogo123 時間: 2007-9-28 13:10
#109

Pro
Radix 600
9252
9254 tail and throttle
401
tj pro
9c
ys 50
hatori pipe
2s2p lipo pack
align reg / glow driver

not sure but, it makes me want to sell my raptor!

作者: gogo123 時間: 2007-9-28 13:13
#110
600nitro pro (white cheqerd canopy)
hyper 50
mp5
401 gyro with matching high speed servo.
HT carbon blades
no other upgrades as none requires
flight time is longer than i can be bothered to stand out in the field (big tank)

very very good heli to fly

align 6v regulator and step down with 2s lipo

i wish my wife was like a lipo battery....... at least the battery has a positive side

作者: gogo123 時間: 2007-9-28 13:14
#111
Red 600 Pro
YS50 ST
CYB MP5 Muffler
3dx CNC fan upgrade
JR PCM Synth receiver
JR 770 Gyro
JR DS8900 Rudder Servo
JR DS8231`s on the swash
JR DS8455 on the throttle
Aerospire Multigov
80mm V Paddles
Align CF Blades
Align Regulator and onboard glow
CF Boom,Metal blade grips,head parts,levers plus other Align upgrades
Black landing gear

作者: gogo123 時間: 2007-9-28 13:16
#113, first flight friday 13th July 2007

Trex 600N Sport
OS50 Hyper
MP2
Align CF main blades
GY401 gyro
AR7000 Rx
9254 throttle, rudder
9451 swash
AeroSpire MultiGov
Self painted plastic canopy
3600 mAh NiMh (to be replaced with Arizona)
3dx fan upgrade

EDIT Recent changes:
Arizona + 2600 mAh Relion (now balances well, was nose heavy)
MP2 changed to MP5, huge improvement. MP2 would not run cleanly.

834423870_c9f5f62e10.jpg (157.15 KB, 下載次數: 38)

作者: gogo123 時間: 2007-9-28 13:18
Well, 114 is a good number.

600N Pro
DX7
OS Hyper 50
MP5
Futaba 601 Gyro
9252 Servos
Throttle Jockey Pro
600 V Blades
2in1 Regulator
Thunder Power 2000 Ma Lipo's(for Now)
Self Painted Canopy

a 5th of Jack Daniels

Look on the wife's face when visa bill arrived, Priceless

Picture_2227-5941.jpg (41.31 KB, 下載次數: 40)

作者: gogo123 時間: 2007-9-28 13:19
#120 600N pro

Swashplate: HS-6975
Throtle: HS-6965
Tail: GY611 w/ 9256

OS 50 Hyper w/ MP2
CSM Revlock 20
Align 2 in 1 Regulator
DX7

Align 600A main, one blade broke during emergency auto (ran out of fuel in flight

); Radix on the way

作者: gogo123 時間: 2007-9-28 13:20
#122 pics added
#122
Trex600N Sport
GY611/ 9256
DX7 w/ AR7000 rx
9451 cyclic
9254 throttle
aerospire multigov
600 radix
MP5
YS50 (awaiting delivery) if the build is finished before YS arrives will be running my extra hyper
6A external BEC w/ 2S 2200mAh lipo

Just recv'd sport kit, can't wait to start the build.

Have yet to finish the build, still waiting for my YS before I finalize my heli

Les

Jsut one mroe hlei tlil the nxet one cmeos aolng!!!

作者: gogo123 時間: 2007-9-28 13:21
#124

600N Sport
OS 50 SX-H Hyper
Hatori SB-50HP Jason Krause Special (2-piece)
G-Force HE CNC Cooling Fan
Align 600B Carbon Main Blades (with canopy fx BladeFX decals)
CYE Super Stubz Paddles
Align 440mm Flybar
Align CNC Metal Tail Rotor Housing
Align Carbon Tail Blades

JR 9303 transmitter with Spektrum DM-9 module
AR7000 Spektrum Receiver
(3) JR DS8311 servos (cyclic)
(1) JR DS821 servo (throttle)
Futaba GY401 with S9254
Model Avionics RevMax
Align 2-N-1 Voltage Regulator

David E. Smith
President, ETMHS
AMA 579111
IRCHA 2336

作者: gogo123 時間: 2007-9-28 13:23
Number 125
OS 50 Hyper
Funtech Muffler
401 and 9254
3001 on ccpm
2 in 1 reg and battery

作者: gogo123 時間: 2007-9-28 13:25
In at 129..........

IMG_0755.jpg (128.9 KB, 下載次數: 28)

作者: gogo123 時間: 2007-9-28 13:26
#135

Hitec 6965s on Cyclic
JR DS821 on throttle
GY-401 and 9254 on the tail for now until I reinstall my logictech
Arizona reg. and re-lions li-ion 2600mah
600mm radix
95mm curtis T/R blades
Curtis Stubz paddles
OS-50 hyper and Muscle pipe
Align CNC main grips
CNC fan
Powermaster 30%
all controlled by a JR 9303 and 2100 receiver
flies like its on rails

作者: gogo123 時間: 2007-9-28 13:27
#136

SPORT
-DS821 on ciclic and throttle
-GY401 and 9253
-OS hyper
-Gforce HP fan
-Hatory SAB-5 RS
-Throttle jokey governor
-JR 7202 TX
-JR 790 RX
-NHP 600 blades

Girls and RC Helicopters are dangerous...!!! but we need them...!!!

作者: gogo123 時間: 2007-9-28 13:28
I guess I'm No.143

Almost finished, can't wait to fly it. Just Wiring and programming left.

Trex600N Pro: White Canopy
V-Blade V2 600mm Main Blades
V-Paddle 80mm
V-Tails 95mm
Fromeco 6V dual Voltage Regulator with Pin Flag.
Futaba 9351 Cyclic
Futaba 9252 Throttle
Futaba GY611 Gyro w/9256 tail servo
Futaba 14MZ Tx
Futaba G3Rx
Futaba GV-1 Governor
G-Force Fan (latest version)
2mm Carbon Frame set
Align Metal Main Rotor grips
Duraflite 4000mah pack (plan on buying a lighter pack after CG check)
OS Hyper50
CY50 MP5 pipe
V50 Clutch liner
Maverick Header tank
I would like to have a custom Canopy painted eventually, but suppose that can wait.

Mellisa aka Lady Magic

作者: gogo123 時間: 2007-9-28 13:29
#144

Yellow canopy from Align
Hitec servos
401 gyro
OS 50 Hyper
Align muffler
CY blades on main and tail
Sport Nitro

Oh what a feeling flying 3D can be

作者: gogo123 時間: 2007-9-28 13:30
#148
OS 50
JK Hatori
3X9451
1X9254
611 9256
RevMax
Fromeco
Spektrum

[PHOTO]/fastphoto/47892/P8120227-8176.jpg[/PHOTO

Raptor 90,Trex 600N Pro,T-Rex 450SE, DX7

作者: gogo123 時間: 2007-9-28 13:31
#150 and 151
#1
600N SPORT
OS 50 Hyper
CY MP2
ALIGN 2in1 reg
Hitec 5955TG
Logictech 6100G

#2
600N PRO
YS 50ST
CY MP2
ALIGN 2in1 reg
HITEC 5955TG
Futaba GY502

Both flying on JR9303

when inverted... down is up and up is expensive

作者: gogo123 時間: 2007-9-28 13:32
Am I #152 or #153 since TREX600Ndriver didnt' follow the numbers and
eric268 didn't pick up on it?

600N Sport
Torque tube
Metal blingy bits ( taken off my 600E that I sold)
OS50
MP? (ain't decided yet)
9252's
601
Multigov (big break here from my normal GV1!)
Arizona reg and fromeco batts.

This hobby is like Kryptonite to chicks!

作者: gogo123 時間: 2007-9-28 13:33
163#

jr 8715
os hyper
mp5 50
gy611 +9256
cms revlock 20
radix 600 mains stock tail

finaly, i made it to SENIOR HELIMEN

作者: gogo123 時間: 2007-9-28 13:34
number 165
nitro pro
os hyper
align metal fan
new align pipe
9255 cyclic
gy 401 and 9254
rev lock 10
radix mains
so much nicer to fly then my raptor 50 r.i.p

作者: gogo123 時間: 2007-9-28 13:34
169 170

Just picked up 2 Sport's at IRCHA. Doing the builds as we speak.

Hypers w/MP5's or Align Pipes (have both to test here with me)
Radix all round w Stubz and 440mm Flybars
LogicTech 6100's
3Dx Metal Fans
MultiGov's
9351's (swash)
9451's (throttle)
Metal Grips w/Infinavation Dampers and Shims
Align 2 in 1 regs with Relion 2600 Lithiums

Jason Greenwood

Fury Extreme, R90SE, R50 | Kasama, 2X T600N's

作者: gogo123 時間: 2007-9-28 13:38
171#

600N Sport
OS 50 Hyper/Hatori SB50
V2 V-Blades
9451's on cyclic
GY611/9256 on tail
ATG(with Hotwings optical sensor)/9253 on throttle
TP 910 mAh 3S with 5.4V UBEC
DX7/AR7000

歡迎光臨亞拓遙控世界討論區 (https://forum.align.com.tw/)